Home

AH1135 generator set air filter E1491L P524838 A2251

Product Introduction

The air filter element of the generator set uses negative pressure to absorb welding fumes and welding fumes into the welding fume purifier equipment. Large particles of sparks are first blocked by the fire screen. Tiny dust particles are filtered by the filter cartridge, and large particles of dust will directly fall to the dust collection drawer. Particulate dust will adhere to the surface of the filter cartridge. After filtering, the clean air fine filter element will enter the clean room and then be filtered and discharged by activated carbon cotton. The cleaning steps and methods of the filter cartridge of the dust removal and welding smoke purifier are as follows: first, unscrew the nut of the filter cartridge cover, remove the filter element, place it vertically in a position where dust can be collected, and tap the inside of the filter cartridge with a small stick to make the dust attached to the outer wall of the filter cartridge fall. The effect of dust treatment can be achieved by beating with small rods in the folds on the outside of the filter cartridge. The filter cartridge of some single machine welding fume purifier is a washable filter cartridge. Remove the filter cartridge, both hands carry the sealed end of the filter cartridge and immerse it in clean water for a moment, bring it up and repeat it many times, which can achieve the purpose of cleaning the dust on the filter cartridge. Can be reused after drying. In addition, gas can also be used to blow back. The pulse-type welding smoke purifier only needs to turn on the pulse dust removal function, and the machine will realize automatic back-blowing dust removal. After the pulse dust removal is completed, it can directly pull out the dust accumulation drawer.

Tag: